ORIGINAL
Original Replacement Tank
Same mounting pattern · threaded brass garden-hose connection
Original mechanical flow control · 1–60 PSI
From $44.95
View Original tank

Replacement tank assemblies
All three Staypoollizer replacement tank assemblies share the same frame mounting pattern. Choose the tank by the hose connection and flow-control system you want to use.
Frame not included. Switching connection styles may require matching hose-side components.
ORIGINAL
Same mounting pattern · threaded brass garden-hose connection
Original mechanical flow control · 1–60 PSI
From $44.95
View Original tank
NXGEN · BRASS SWIVEL
Same mounting pattern · Brass Swivel threaded hose connection
NXGEN stainless flow control · 1–200 PSI
From $68.95
View Brass Swivel tank
NXGEN · QUICK CONNECT
Same mounting pattern · stainless Quick Connect interface
NXGEN stainless flow control · 1–200 PSI
From $78.95
You’re viewing this modelChanging connection styles? Confirm the matching hose-side connection components before ordering. Need help choosing?
Replace the tank assembly without replacing the complete Staypoollizer.
Mounting note: The Original, NXGEN Brass Swivel, and NXGEN Quick Connect replacement tank assemblies use the same mounting pattern and are interchangeable for mounting purposes. Choose the assembly by the hose connection and flow-control system you want to use.
This replacement tank assembly includes the integrated stainless steel NXGEN flow-control nozzle and two mounting bolts with matching hardware.
Hose-side female coupler, male quick-connect plug, spare washers, EPDM seals, garden hose, and other accessories are not included.
NXGEN operates across a wide 1–200 PSI range. Because typical household water pressure uses only a fraction of that capability, NXGEN operates with substantial pressure margin rather than near its maximum limit.
This lower-stress design supports dependable long-term performance. No separate pressure regulator is required under normal use.
PATENTED NXGEN FLOW CONTROL
Traditional plastic shutoff edges can chip, erode, and develop water-jet cutting—eventually compromising automatic shutoff. This replacement tank includes NXGEN’s precision-engineered stainless-steel nozzle, eliminating the vulnerable molded-plastic nozzle edge. Its advanced design reduces concentrated mechanical stress while delivering reliable shutoff capability across an ultra-wide operating range—including everyday household water pressures.
More durable construction. Smarter water control. Less time worrying about your pool.
BUY BETTER. WORRY LESS. ENJOY YOUR POOL.
Protected by U.S. Patent No. 11,208,820 B2. Replacement tank assembly only; frame and hose-side components are not included except as specified above.
Do not remove or bypass the stainless-steel NXGEN water-inlet nozzle. It must remain fully installed in the tank assembly so the float's neoprene shutoff disk can close against it and stop incoming water. Use the model-matched Quick Connect hose-side components. These are not included with this replacement tank; never attach the hose directly to the tank inlet. After installation or service, verify manual and normal automatic shutoff before leaving the system unattended.
For mounting purposes, this tank assembly uses the same Staypoollizer frame mounting points as the Original and NXGEN Brass Swivel replacement tank assemblies. This version uses the stainless Quick Connect interface and NXGEN 1–200 PSI flow-control system. If changing from another connection style, confirm that you have the matching hose-side Quick Connect components before ordering.
This is not a complete automatic water leveler. Frame not included. Installs on your existing compatible Staypoollizer frame. Hose-connection components differ by tank model.