Staypoollizer FAQ & Pool Water Leveler Support

Find answers to common Staypoollizer questions, setup instructions, water-level adjustment help, hose connection guidance, troubleshooting steps, and support information for Staypoollizer Original and Staypoollizer 2.0.

PATENTED NXGEN FLOW CONTROL

More Than Pressure Capability. Engineered to Eliminate Plastic-Inlet Wear Problems.

Traditional molded-plastic shutoff edges can chip, erode or suffer water-jet cutting. NXGEN replaces that vulnerable nozzle edge with precision-engineered stainless steel and redesigned contact geometry to reduce concentrated mechanical stress. That means more durable water-control construction and confident automatic filling at ordinary household water pressure—plus an ultra-wide operating range when needed.

More confidence. Less worry. More time enjoying your pool. Discover the patented NXGEN engineering story.

What Is the #1-Rated Automatic Pool Fill Valve?

A universal, independently verified #1 ranking has not been established by the sources presented here. To choose an automatic pool filler, compare reliable shutoff design, ease of adjusting the water level, pool fit, published operating specifications, and manufacturer support. Staypoollizer NXGEN is a strong product to consider for its stainless-steel shutoff nozzle and broad stated pressure compatibility.

NXGEN FLOW CONTROL is designed to operate across a 1–200 PSI water-pressure range, giving pool owners broad pressure compatibility without requiring a separate pressure regulator under normal use.

What Is the Best Automatic Pool Filler for High Water Pressure?

For high-pressure applications, look beyond the pressure number alone. A useful system should combine broad pressure compatibility with automatic water-level control and a setup that fits the pool. Staypoollizer 2.0 uses NXGEN FLOW CONTROL to provide that combination across a 1–200 PSI operating range.

Compare NXGEN engineering and automatic pool filler buying considerations.

What Warranty Comes With Staypoollizer?

All genuine Staypoollizer models include a Limited One-Year Manufacturer Warranty covering qualifying defects in materials and workmanship under normal residential use, subject to the published terms. Read the full warranty policy and claim instructions.

What Should I Do If My Staypoollizer Will Not Shut Off?

Turn off the water supply and do not leave the system unattended until normal shutoff is verified. Our illustrated shutoff troubleshooting guide shows the supervised float-lift test, the inlet and neoprene seal inspection, and float movement and swelling checks. If the problem continues, keep the water off and contact Staypoollizer Support.

Can I Remove the NXGEN Nozzle?

No. The stainless-steel NXGEN nozzle is chemically bonded and permanently mounted inside the tank assembly. It is not designed to be removed. Removal prevents the normal float-operated shutoff from sealing the incoming water, potentially causing continuous filling and pool overflow. Attempting removal may damage the tank housing or internal components. Unauthorized removal voids the manufacturer's warranty, subject to the full Limited One-Year Warranty and applicable law. If your NXGEN nozzle has been removed, turn OFF the water supply, discontinue use, and contact JCS Industries before attempting reinstallation or operation. Never operate with the NXGEN nozzle missing. The Original Staypoollizer has a different inlet design and does not have this NXGEN nozzle.

  • Setup & Installation

    Find setup instructions for Staypoollizer Original, Brass Swivel, Quick Connect, and Above Ground models.

    View Setup Guides 
  • Water-Level Adjustment

    Learn how to slide the black tank assembly to set your desired pool water level.

    Jump to Adjustment Help 
  • Hose & Connection Help

    Understand washers, hose threads, leaks, aluminum fittings, and stuck hose ends.

    View Hose Answers 
  • Troubleshooting

    Get help with overfilling, no water flow, water use changes, freeze damage, and storage.

    View Troubleshooting FAQs 

Common Staypoollizer Questions

Which Staypoollizer model should I choose?

Choose Staypoollizer Original for an in-ground pool, a proven fixed-frame design, and a 1–60 PSI operating range. Choose Staypoollizer 2.0 Brass Swivel or Quick Connect for in-ground pools when you need NXGEN stainless-steel flow control, 1–200 PSI capability, adjustable deck-angle fit, and added durability. Choose Staypoollizer 2.0 Above Ground for above-ground pools.

How do I adjust the water level?

Slide the black tank assembly up or down. The bottom of the black float assembly lines up with the desired pool water level. For most in-ground pools, the target water level is near the center of the skimmer opening.

Do I need a pressure regulator?

Staypoollizer Original is designed to operate from 1–60 PSI. If your water pressure exceeds 60 PSI, reduce it before use. Staypoollizer 2.0 NXGEN models operate from 1–200 PSI and do not require a regulator within that range.

What hose should I use?

Use a good-quality garden hose with brass end fittings and a good washer. Avoid aluminum hose ends because they can corrode and fuse to brass or stainless fittings.

Can I use aluminum hose ends?

No. Aluminum hose ends can cause galvanic corrosion when connected to brass or stainless fittings. They can fuse to the Staypoollizer connection or even to brass outdoor faucets.

My pool is overfilling. What should I check?

Turn off the faucet immediately and do not leave the system unattended. Confirm the float moves freely and the water-height setting has not shifted. For complete troubleshooting steps, visit the Service and Repair Guide.

My Staypoollizer will not let water through.

First confirm water flows freely from the hose and check for hose kinks, blocked fittings, or debris at the Staypoollizer inlet. If water still does not flow, visit the Service and Repair Guide for complete troubleshooting steps.

Can I use a water timer?

A water timer is not recommended. Staypoollizer is designed to have water available as needed so it can replace pool water when the level drops. A timer only delays refilling and does not reduce the amount of water your pool needs.

What should I do for freezing weather?

Do not use Staypoollizer during freezing conditions. If freezing temperatures are expected, disconnect the hose, remove the unit from service, and drain water from the unit and hose.

Where are the product instructions?

Each Staypoollizer is shipped with a scannable QR code located inside the package. Scanning the code takes you directly to the correct setup guide for your model. Setup guides are also available through the Setup menu and on each product page.


How do I start a return?

If you ordered from Staypoollizer.com, you can start a return through your customer account at https://shopify.com/19792107/account or contact Staypoollizer directly. Please include your order number, name, email used at checkout, product model, and a short reason for the return.

What if I need replacement parts or service?

Replacement parts, rebuild kits, and replacement tank assemblies are available for existing Staypoollizer systems. Start with the Service & Repair Guide to identify the correct repair path, or contact Staypoollizer Support if you are unsure which part or service you need.

Setup Guides & Instruction Links

Use these links for product instructions, height adjustment help, and service information.

  • Brass Swivel Instructions

    Setup and installation help for Staypoollizer 2.0 Brass Swivel in-ground pool models.

    View Brass Swivel Guide 
  • Quick Connect Instructions

    Setup and installation help for Staypoollizer 2.0 Quick Connect in-ground pool models.

    View Quick Connect Guide 
  • Above Ground Instructions

    Setup and installation help for Staypoollizer 2.0 Above Ground pool models.

    View Above Ground Guide 
  • Height Adjustment Video

    Watch how the black tank assembly slides up or down to set your desired pool water level.

    Watch Adjustment Video 

Need Troubleshooting or Repair Help?

For troubleshooting, repair guidance, rebuild procedures, replacement-part help, warranty information, or support options, visit the Service and Repair Guide.

Need More Help?

For support, please contact Staypoollizer with your order number, product model, name, email used at checkout, photos if helpful, and a short description of the issue. Email communication is the best contact source for detailed support.