Your above-ground pool stays ready, even when you’re away.
Set your preferred water level once. The Staypoollizer 2.0 Above Ground automatically replaces water lost through evaporation and splash-out, then stops filling when the selected level is restored.
Before You Order
Designed for many common above-ground pool styles. Confirm that your pool wall, top rail, and edge design can securely support the mounting frame and your selected water-height range.
A standard garden hose is required and sold separately.
How It Works
1. Secure the mounting frame.
Position the Staypoollizer over a compatible top rail and secure it using the included U-bolt mounting hardware.
2. Connect the hose.
Attach a standard garden hose to the threaded brass swivel connection and turn on the water supply.
3. Set the water level.
Slide the black tank assembly to your preferred water height.
4. Let it work automatically.
When the pool level drops, Staypoollizer adds water until the selected level is restored, then shuts the water off.
Hose Connection Tip
Make sure the hose end is in good condition and seats fully against the gasket inside the brass swivel connection. Damaged or unusually short hose threads may not seal properly.
Brass hose fittings are recommended. Avoid aluminum hose ends, which can corrode and seize to the brass swivel over time.
Seasonal Care
Disconnect the hose and drain the Staypoollizer completely before freezing conditions.
Automatic Pool Water Leveler for Above-Ground Pools
Keeps your pool at the water level you set automatically, without permanent plumbing or constant manual refilling.
Staypoollizer 2.0 Above Ground
Staypoollizer 2.0 Above Ground
✓ Brass swivel garden-hose connection
✓ NXGEN Flow Control: 1–200 PSI
✓ No separate pressure regulator required
✓ No permanent plumbing required
Measure vertically from the top rail or mounting surface to your preferred water level.
Confirm your pool wall, top rail, and edge design are compatible before ordering.
Couldn't load pickup availability
✓ Free standard shipping within the continental U.S.
✓ Setup guidance and customer support available
Need help before or after purchase?
Your above-ground pool stays ready, even when you’re away.
Set your preferred water level once. The Staypoollizer 2.0 Above Ground automatically replaces water lost through evaporation and splash-out, then stops filling when the selected level is restored.
Before You Order
Designed for many common above-ground pool styles. Confirm that your pool wall, top rail, and edge design can securely support the mounting frame and your selected water-height range.
A standard garden hose is required and sold separately.
How It Works
1. Secure the mounting frame.
Position the Staypoollizer over a compatible top rail and secure it using the included U-bolt mounting hardware.
2. Connect the hose.
Attach a standard garden hose to the threaded brass swivel connection and turn on the water supply.
3. Set the water level.
Slide the black tank assembly to your preferred water height.
4. Let it work automatically.
When the pool level drops, Staypoollizer adds water until the selected level is restored, then shuts the water off.
Hose Connection Tip
Make sure the hose end is in good condition and seats fully against the gasket inside the brass swivel connection. Damaged or unusually short hose threads may not seal properly.
Brass hose fittings are recommended. Avoid aluminum hose ends, which can corrode and seize to the brass swivel over time.
Seasonal Care
Disconnect the hose and drain the Staypoollizer completely before freezing conditions.
